Updated another older library of mine. Here’s the info:
* Frequency response jaggyness reduced, the same as with my recent Cassette Deck 1 and 2 updates.
* Dropped the ‘A’ from the original library name- “Casspressors A”. I originally thought I might do more of these, but I really doubt it now.
* SHQ versions added, with increased frequency response accuracy.
* Programs are using the more recent method I’ve been using in my compressor programs, which is faster and more accurate.
* Impulses have all been looked at and edited by me. Fixed lots of little minor issues, too many to list or remember. End result is the dynamic behavior is a little better.
* Moved to a new category name in Nebula, CT (TC, for Tape Compression).
* Completely re-did the attack/release behaviors of the programs. They now use 4 different sets of behaviors, taken from 4 of my compressor releases, and which are using the most up to date adjustments (the Rayphlex attack/release behavior is updated).
* Set each program to use different detector types as well as feedback/feedforward signal ratios for the detection path, to increase variety in the sound across the effects.
* Got rid of all of the alternate programs in the various sub-categories. Now there are just two programs for each sampled tape effect. The main one, and a secondary version, which uses alternate attack/release behaviors from a different compressor than the first one, as well as different detector modes, and feedback/feedforward signal ratios.
* Lots of harmonic samples were removed, which had no actual impusle (it had fallen below the noise floor). Some kerns were removed too, when the harmonics just weren’t contributing anything.
* Added Wet/Dry control. It’s pretty cool.
* Probably lots of other things little that I don’t remember.